Preparations before CK0640 CNC lathe processing

CK0640 flat bed cnc lathe machine adopts mechatronics design, which can automatically complete the processing without the need for workers to stare at all times, reducing labor. And cnc lathe manufacture can automatically complete the processing of turning various parts; such as: inner hole, periphery, end face cutting, etc.

The bed structure of Mini cnc lathe machine adopts high-rigidity cast iron, resin sand technology, and the overall structure of the bed foot and bed has the characteristics of smooth chip removal and compact structure.

Lathe machine mini cnc's row-type tool holder makes repeated tool change error extremely small, and the tool change is high-speed and accurate, which can greatly save processing time.

Preparation before CK0640 cnc mini metal lathe machine processing:

The tool holder and the tool need to be prepared according to the workpiece process, and the tool holder needs to be selected according to the size of the tool holder. When using taps or reamers, the corresponding special auxiliary tools should be equipped on the inner hole tool holder. When installing the tool, it is necessary to check the relative position of the tool nose and the center height of the spindle.

Appropriate tooling, fixtures and corresponding tools need to be prepared before the specimen is cut.

The random clamps are generally general spring chucks or three-jaw chucks, and the clamps are self-made or customized according to the specific workpiece needs.

The clamping and unclamping action of the fixture is generally controlled by the console button. Under the premise of considering the safety interlock, the front part of the CNC lathe turning can also be customized with clamping and unclamping switches.

After all the preparations are ready, the parts can be tested. After the test results meet the specified requirements, the parts can be processed.

When the CNC horizontal lathe is turned on or has a long downtime during the machining process, the automatic cnc lathe must be preheated to run, especially when the ambient temperature is low, and it is necessary to pay attention to one-third or one-half of the high running speed of the spindle and feed axis. As soon as it runs for ten to twenty minutes, the workpiece can be formally processed after the motion pair is fully lubricated and the temperature of the CNC lathe fanuc is stable.